Under Road Heating System – Electric Surface Heating Element

Road Surfaces Heating Mat/ Cable

Snow melting cable and mat for asphalt applications are special cables with enhanced temperature with standability and mechanical strength. Hot asphalt can be poured directly on top of these cables which offers a huge advantage over conventional systems. The base layer that the cables are going to be placed onto should be firm, level and should not contain any sharp elements which could damage the cable. These cables can be used for asphalt driveways, pavements, roads, parking bays, etc.

SMCA/SMMA for temperatures upto 240°C for a short duration and safely above 150°C at which the asphalt is laid.

Technical Details

• Linear Wattage Density: 30W/m (standard), 40W/m (on request)
• Rated Voltage: 230V, 50Hz
• Nominal Limit Temperature: 80°C
• Installation Temperature: -20°C
• Conductor: Twin core/Single core, Class-2 resistance alloy
• Core Insulation: Advance fluoropolymer
• Earth Shield: Copper shielding
• Outer Sheath: High temperature TPE
• Cold lead connection: Type- Y attachment (Upto 5 mtr) both side or one side depending upon single or twin configuration.
• Cable diameter: 6mm-7mm
• Protection category: IPx7; UV resistant

Asphalt Heating Cables

Rating
Approx. 30W/m to 40W/m at 230V
Single/Twin Conductor cable

While ordering – Note:
Linear wattage W/m
Heating conductor twin or single

Product Range

Asphalt Heating Mat

Rating
Approx 300W/m2 to 400W/m2 at 230V
Single/Twin Conductor mat

While ordering – Note:
Wattage density W/m²
Heating conductor twin or single.

Product Range